Latest pneumatic breaker Tenders | Government pneumatic breaker Tenders

CTN :45386932

16 Jun, 2026 6.59 Crore

Gwalior - Madhya Pradesh

Tender For construction and development (civil work) for construction and demolition waste plant of 100 tpd as per boq of rfp/dpr supplying erection and commissioning of machines/equipment for construction and demolition (c and d) waste plant of 100 tpd 2nd cal - all kinds of soil, "excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers,, loose or soft soil, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all w, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "foundations, footings, bases of columns, etc. for mass concrete.", cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "columns, pillars, piers, abutments, posts and struts.", "reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves,, "lintels, beams, plinth beams, girders, bressumers and cantilevers.", "along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm o, "filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exce, thermo-mechanically treated bars. (fe 500 d or more), "aluminum turbo ventilator fan, size: dia 600 mm market rate", "sky light market rate ", 80x1.25mm m.s. laths with 1.25 mm thick top cover., "providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 wit, cement mortar 1:6 (1 cement : 6 coarse sand), 1:6 (1 cement: 6 sand), two or more coats on new work, "structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoist, 0.80mm thick with zinc coating not less than 275gm/m , 0.80mm thick with zinc coating not less than 275gm/m , "35 mm thick including isi marked stainless steel butt hinges withnecessary screws.", 35 mm thick shutters, half brick masonry with of class designation 40 in foundation and plinth in.cement mortar 1:4 (1 cement : 4 coarse san, "providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) nano polished (glossy, providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be lai, providing and fixing m.s. grills of required pattern to wooden frames of window etc. with m.s. flats at required specin, "construction of embankment/sub grade/ earth shoulders, as per clause 305 & its sub-clauses, where required but with app, "construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor, "providing, laying, spreading and compacting graded stone aggregate to wet mix macadam including premixing the material, providing and applying primer coat with cationic bitumen emulsion (ss1 grade) on prepared surface of granular base inclu, @ 0.25 kg per sqm (normal bituminous surfaces), for grading ii( 50-75mm thickness ) bitumen content 3.4% (vg-30), "for grading ii ( 30-40 mm thickness ), bitumen content 5.4% (vg-30)", procurement of fully automatic c&d waste processing unit(100 tpd) with dry and wet process inculding feeding & crushin, procurement of table vibrator for paver making unit including table vibrator,colour mixer,colour pigment,tables,concre, procurement of fully automatic fly ash bricks machine (120 ton compress force) with fully sensor based controlled 7 nos, procrement of vehicles articulated front end wheel loader,4-wheel drive,1.4 cum bucket,hydrostatic drive,, procrement of vehicles/tipper truck blazo 28t tipper,9 speed,bogie suspension,11x20-16pr tyres,6.17rar ,nac,16 cum box,4, procurement of pneumatic breaker (quotation), electrification /internal wiring and electrification (market rate)

Central Government/Public Sector

CTN :45373604

15 Jun, 2026 NA

Multi City - Multi State

Tender For supply of spacer , spacer a , bipolar spacer , palacos r cement 40gm , cement subiton gun g ce , g bone , va volar distal radius , stimulan rapid cure 5cc , stimulan rapid cure 10cc , fiber wire , wire spool , trocantic locking , loking screw 4mm , jess fixator , advantage kit , cement restrictor , tur set , camera cover , suture disc round hole , steinman pin , schanz pin , dehan pin , hto plate tit , bone wax , abjel regular , depy uaepar , finger distractor , saver blade 4.5mm , spine drape , aviation anterior cervical cage , cervical polyaxial screw 3.5mm , anterior cervical plate , neuro surgical patties wm20 , clavicle plating , pelvic recon. plate with , multilock proximal , first pass mini , osteo stitich all inside meniscus repair , gigliso wire , dimsc nail , 4.0 vicryl and ethilon , elizar fixat , elizar fixator , hip society screw , cannula , calcar stem , calcaneal locking plate 3.5mm , mesh cage - diamond cut , mis polyaxail pedicle screw - 6.5mm , scolysis spine set , radial head prosthesis , radial head locking plate , bipolarlong stem , bipolar stem , finger plating , dhs plate dc hole , dc hole 95 , vapr premiere 90 , stimular rapid cure 10cc , fiber glass cast , mis spine , shoulder stemp , proximal femur nail long , syrus femur nail long , dims nail , export tibia nail , h t o plate titunium , hto plte ss , revision total knee replacement , revision total hip replacement , charging with adaptor , battery saw pcs , chuk and key , periprosthetic plate , mini contour plate , femur nail , tibiapost scre , tibia insert , cannulated cancellous screw , digital torniquet cutt , digital torniquet cutt arm , turp set, bone wax , nail elbow tap , ns 3 litre , sterile sizy mop , deterater machine battery , digital torniquet , ecg machine , pns oximeter , big size intrument trolly , plus oximter , mosquito forcep , mosquito forcep artery , tooth forcep , plain forcep , plier , nibbler , needle holder , l retractor small , l retractor medium , l retractor large , l retractor , reduction clamp small , reduction clamp medium , reduction clamp large , periostem , osteotem , tourniquet cup , bp cup , 3.5mm proximal tibia plating , 5.0mm proximal tibia plating , calcar plating , tibial nail , k wire cutter , herbert fixator , mm small plating , samll plating , distal hume , foot ankle plating , sucher passer needle , hand plating //bid details 2 / 83

State Government

CTN :45046874

08 May, 2026 12.36 Lacs

Multi City - Karnataka

Tender For 1)inspection of stator coil for identification of exact no. of the faulty coil and setting up the arrangements for rotor pole coils removing and rotation as per scope of works along with supply of materials and other consumables as per scope of works2)de-brazing the rotor pole terminations and removing the rotor poles (as required). dismantling of rotor poles using suitable and compatible tools, fixtures, and lifting arrangements. ensure safe handling and proper marking for reassemble. rotate and position the rotor appropriately to access the damaged stator coil area.3)remove insulation from both ends of the affected winding section.4)de-brazing of defective coils. 5)driving out the slot wedges carefully remove wedges from stator winding slots without damaging adjacent coils or core.(entire stator winding shall be inspected in case of loose wedges, worn out wedges and missing wedges shall be replaced) along with supply of materials and other consumables.6)insulation removal- remove insulation from both ends of the affected winding sections.7)cutting the coil bindings in both sides. cut the identified damaged winding portion using appropriate tools. carefully pull out the damaged coil from the stator slots without affecting surrounding windings.8)damaged winding cutting- cut the identified damaged winding portion using appropriate tools.9)winding extraction- carefully pull out the damaged coil from the stator slots without affecting surrounding windings. while removing the faulty coils from stator, utmost care should be taken to prevent any damage to stator core.10)removal of faulty coils from the slot.11)slot cleaning and preparation-clean stator inner tooth slots thoroughly. use emery paper to smoothen and maintain uniform slot condition.12)cleaning of carbon deposits/heavy oil content from complete stator coils through co2 cleaning process /dry ice blasting.13)new coil installation-insert new stator coil with proper alignment. fix securely using new wedges of appropriate grade and size.14)brazing of the coil ends.15)re-fixing the rotor poles and connecting them.16)insulation application-apply insulation as per specified class (e.g. class f/ classh). ensure proper curing and finishing.17)complete co2 / dry ice cleaning of stator and rotor.re insertion of removed rotor poles. 18)final checks & testing- insulation resistance (ir) test, high voltage (hvdc) test, continuity check, visual inspection and any other tests which are required (will be carried out by kpcl).19)assembling of removed damper doors and stator covers.20)maintain quality standards throughout the process & use calibrated tools and approved materials.21)presence of the agency during excitation and synchronization of the unit by kpcl.22)safety & quality-follow all safety procedures and ppe requirements

corporations/Associations/Others

CTN :45061502

08 May, 2026 8.37 Lacs

Ananthapur - Andhra Pradesh

Tender For engaging of jcb, pneumatic breaker, dewatering pump, and skilled welding team for attending emergency water supply works in south zone of ananthapuramu municipal corporation.

corporations/Associations/Others

CTN :45061505

08 May, 2026 8.42 Lacs

Ananthapur - Andhra Pradesh

Tender For engaging of jcb, pneumatic breaker, dewatering pump, and skilled welding team for attending emergency water supply works in north zone of ananthapuramu municipal corporation.

corporations/Associations/Others

CTN :44959021

01 May, 2026 NA

Donimalai - Karnataka

Tender For supply of 1600156146 safety cartridge pn 5610968 , 1600137755 filter cartridge pn 5610969 , 1600137751 oring pn 7264142 , 1600137749 seal pn 7368993 , 1600257631 main element pn 7619404 , 1600203643 safety element pn 7619405 , 1600137752 filter insert pn 10037621 , 1600137750 supporting ring pn 10038693 , 1600156147 aeration filter pn 10222393 , 1600166615 filter element pn 10801155 , 1600203645 power generator v belt pn 11005340 , 1600137748 seal pn 11005385 , 1600137754 fibre glass filter insert pn 11065673 , 1600156145 fuel filter element pn 11825264 , 1600392020 testfil tereinsatz pn 12215355 , 1600392021 filter insert pn 12284005 , 1600203641 supporting ring pn 7372317 , 1600203642 o ring pn 5608035 , 1600551607 chain end link cpl pn 12267690 , 1600331104 track pad screw pn 11837263 , 1600331105 track pad nut pn 7365031 , 1600139556 tooth pn 11102212 , 1600139608 block pn 11110118 , 1600139557 locking bolt pn 12201705 , 1600166614 ultrasonic sensor pn 11825595 , 1600785253 electrical assembly pn 11075594 , 1600763255 proximity switch pn 10376400 , 1600763256 induction dampening sensor pn 11752936 , 1600392028 alternator pn ll00319 , 1600787268 water hose pn 9758021 , 1600787269 water hose pn 11069323 , 1600787267 pressure feeder valve pn 5616231 , 1600789190 hydr variable pump pn 12571003 , 1600645069 hose pn 5612371 , 1600763262 hose pn 11692881 , 1600763254 directional control valve pn 10441583 , 1600455883 diaphragm accumulator pn 5617780 ) /bid number : gem/2026/b/7462159 * /dated: 21-04-2026 & & / bid document 1 / 36

CTN :44288284

31 Mar, 2026 NA

Kalpakkam - Tamil Nadu

Tender For corrigendum : supply of sprocket wheel of travelling water screen of foot shaft at de side as per drawing & specifications. , sprocket wheel of travelling water screen of foot shaft at nde side as per drawing & specifications. , sprocket wheel of travelling water screen for head shaft as per drawing & specifications enclosed he , tooth insert sprocket bracket for tws as per drawing and specifications.

CTN :44560393

30 Mar, 2026 NA

Thane - Maharashtra

Tender For supply of insert sx e5.00n0.30-m1 ctp 1340 having vc of 100m/min with feed per tooth 0.1 with depth of cut of , insert xcnt 10 t3 04 en. for machining job upto 35 hrc having parameters rpm 697 feed 0.2 life of

Pneumatic Breaker Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others